How to fix iPhone black screen of death issues ?

How to fix iPhone black screen of death issues ?

Your iPhone helps you stay informed, connected, and most importantly, entertained. Now, a black screen of death can threaten your connectivity parameters. Moreover, it seems a heart-stopping moment and you might start thinking about purchasing a new iPhone.

However, dedicated on-point fixes can restore life to your iPhone. Let’s check out some proven fixes as suggested by iPhone repair Dubai experts. So, try them out and see if you can revive your cherished iOS device.

How to Fix iPhone’s Black Screen

A black screen of death has kept countless iOS users confused. Fortunately, you don’t have to be one of them since an iPhone repair in Dubai has provided efficient solutions regardless of different variants and iOS versions. Before you dive into the pool of fixes, you can try to understand why this happens in the first place.

Then, you can apply the most suitable fix according to your situation. Let’s decode the possible reasons, beforehand.

Drained Battery

Chances are that your iPhone has exhausted its battery to its last juice. That’s why your iOS device doesn’t turn on no matter how hard you try or keep pressing the power button. So, all you see is a black screen of death and nothing else.

Software Conflicts

An iPhone repair near me has confirmed that glitches with software and applications can make your iPhone break down and the screen appears black. Perhaps, an update of the operating system or iPhone app might help you in this situation.

Malware and Virus

iPhones are less likely to get a virus or malware attack but you can’t discard any chances. Reportedly, an infection of virus or malware can make your iPhone idle and its screen black. So, virus removal might be the right step for your iPhone based on your circumstances.


Apple has strictly forbidden users to jailbreak iPhones. However, iPhone users prefer jailbreaking to gain unauthorised access. Consequently, your iPhone may fall victim to software problems and unstable operations as reported by an iPhone repair service near me.

Hardware Damage

iPhone repair services in Dubai have shared that any kind of physical damage to your iPhone’s screen can make it completely disabled. A repair issue with the iPhone’s internal components or water damage can cause a black screen of death.

So, you can opt for dedicated fixes directly if you are sure about what triggered the instance. Otherwise, you can proceed with the following fixes one by one, as recommended by an iPhone repair Dubai shop.

1. Adjust Your iPhone’s Brightness

Your iPhone may appear dead if the brightness is too low. Indeed, a software glitch can lower your iPhone’s brightness. Since you might not feel comfortable accessing the iPhone’s dark screen, you can try voice commands and see if Siri responds to you. 

Ask Siri to increase the brightness level if the feature is enabled on your device. See if it works. Otherwise, you can manually level up the brightness before you proceed to other remaining fixes.

2. Plug Your iPhone into its Charger

Over time, your iPhone’s battery loses its capacity to hold the charge and keep your device up and running for a longer period. Even a time can come when your iPhone can barely keep itself awake without the power supply.  So, you thought about visiting an iPhone repair in Dubai as your iOS device exhibits a black screen of death.

However, you can get out of such a situation just by charging your device. Here’s what you need to follow:

  • Use a fine-working Apple-certified adapter and cable to charge your iPhone.
  • In addition, make sure you don’t use a defective power source to plug your iPhone charger.
  • After that, charge your iPhone for at least 30 minutes.
  • Next, you can try powering it on.

Your iPhone should start without any drama if the drained battery is the only issue. However, you might require a battery replacement if your iPhone only starts after charging it.

3. Discard Conflicts with an Application

Your iPhone can malfunction and a black screen of death might pop up if an app is not compatible with the device. After all, not every application is created equal. If you notice that the black screen only appears when you open it up then you should kill the program and see if it helps.

Here’s how you can kill or quit a specific application on your iPhone if the device is responsive:

  • Swipe up from the bottom of your iPhone screen and navigate to the app you want to close. Now, swipe up the app from the screen.
  • If you own an iPhone with a Home button then, double-tap the Home button. A similar window will appear and you need to identify the problem-causing application. Swipe up the application window and it should close the app.

If closing the app solves the black screen problem then you need not proceed further. Otherwise, there are still fixes left to restore your iPhone to its highest productivity level possible.

4. Force Reboot your iPhone

A temporary glitch should melt away with a quick restart. Have you tried rebooting your iPhone when the black screen appears? Experts from an iPhone repair in Dubai verify that many users have benefitted from it. So, you should try applying this fix too. 

A forced restart is turning your device off and on after a while. In return, your iPhone will wipe out its short-term memory. This process will also clear all the open applications and give your iPhone a fresh start. However, you need not worry as this doesn’t remove any saved data from your iOS device.

The following steps will help you force restart an iPhone 8 or later:

  • Immediately press and let go of the Volume Up button.
  • Next, press and immediately release the Volume Down button as well.
  • Now, press and hold the Wake/Sleep or Side button.
  • Release the button when the Apple icon appears.

If you want to force restart iPhone 7 or iPhone 7 Plus, here’s what you need to follow:

  • Begin by pressing and holding both the Volume Down and Side or Sleep/Wake button.
  • Once the Apple logo pops up, you can let go of those buttons.

For iPhone SE, iPhone 6 and earlier devices, you should stick to the guidelines below:

  • Hold the Side or Sleep/Wake and Home buttons at the same time.
  • You can release the when the Apple logo appears.

Test if your iPhone rejuvenates after a forced restart. Or else, you can proceed with the remaining fixes.

5. Make Your iPhone Enter Recovery Mode

Are you still dealing with a black dead screen problem on your iPhone? This specific heavy-duty fix may help you eradicate the problem. iPhone repair services Dubai professionals are optimistic that triggering your iOS device into the dedicated Recovery Mode may troubleshoot your issue.

However, you need to connect your iPhone to your computer and use the special troubleshooting tool named Recovery Mode. here’s how you can initiate Recovery Mode on your iPhone:

  • Use an appropriate cable to connect your iPhone to a compatible computer. Make sure both your devices are up to date.
  • Depending on your macOS version, access Finder or iTunes. If it’s macOS Catalina or higher then open Finder. Otherwise, launch iTunes. However, you must launch iTunes on a Windows PC.

Now, further steps will vary based on your iPhone model. For example, iPhone 8 or later and second and third-generation iPhone SE devices require the following steps:

  • Press your iPhone’s Volume Up button and quickly release it from your grip. Repeat the same with your iPhone’s Volume Down button.
  • Next, press the Side button and hold it down until the Recovery Mode screen appears. The Recovery Mode screen can take up to 10 seconds to pop up.

What about Other iPhone Builds?

However, the above steps won’t work for iPhone 7 and iPhone 7 Plus. instead, you must simultaneously press and hold the Side and Volume Down buttons. Release them when the Recovery Mode sign pops up on your iOS device.

For the iPhone SE first generation, iPhone 6s or previous models, you should hold the Top or Side and Home buttons together. The Recovery Mode should show up, shortly. After you make your iPhone enter the Recovery Mode, you can see options to restore a backup to the phone or update the operating system.

Well, iPhone repair services Dubai experts suggest backing up your iPhone data in case anything goes wrong. Then, you will have a recent backup to restore from.

6. Opt for a Factory Reset

Does your iPhone still show a black screen and not turn on even after a Recovery Mode operation? Well, a Factory Reset is the last resort to make your iPhone work again by yourself. Otherwise, you might have to consider an iPhone repair service in Dubai and fix the hardware failure.

Performing a factory reset on your iPhone has its risks. For example, you can lose all your saved data such as photos and videos, files, music, contacts, accounts and passwords, messages, etc. So, it’s better if you back up your iPhone data regularly. Here’s what factory resetting your iPhone needs:

  • Since your iOS device doesn’t turn on, you need to plug it into a Mac or Windows PC.
  • Next, press the Volume Up button followed by the Volume Down button. Make sure you release them immediately.
  • Hold down the Side button of your iPhone until Recovery Mode makes an appearance.
  • Then, open Finder or iTunes based on your computer OS variation.
  • Next, find your iPhone on your Windows PC or Mac. Select Restore when you notice a message that says that your iPhone requires an update or data restoration. Opt for the Restore option again to confirm your selection.

Ensure you keep your iPhone connected to the computer until the process is complete.

Is it a Physical Damage?

If you still can’t bring your iPhone out of the loophole of the black screen then chances are that your device has received some kind of major injury. So, you can carefully inspect the device for any indication of physical damage like dents on the body or cracks on the screen.

On the other hand, water damage can make your phone dead, as confirmed by iPhone repair Dubai professionals. If you don’t want to take further risks, seek expert intervention at the earliest and restore your device.