Washing Machine Drum Replacement Guide for Beginners

Your washing machine shakes a lot, and the laundry is still dirty after a cycle. These are classic signs that you may need a washing machine drum replacement. Now, the question arises: Can you replace the washing machine drum on your own?

Well, that depends on your knowledge and skills regarding the washer. If you are handy with tools, then replacing the drum won’t be a big deal.

Atdoorstep provides an easy guide to identify drum damage and replace parts for a better laundry experience. Let’s swing in.

Does Your Washing Machine Need a Drum Replacement?

First, you need to understand whether the washer problem stems from the drum or not. The drum of your washing machine is the tub or cavity where you throw your apparel and linens. When you start the washer, the drum spins to clean the laundry.

So, it will be a big inconvenience if the drum fails to rotate. However, will a washing machine drum replacement be the ultimate solution? Other washer parts can be responsible for this, as well.

That’s why you must be sure whether you need to replace the washing machine drum or something else. Here are some reasons and signs of drum damage you should be aware of:

Stuck Foreign Objects

Ripped clothing tags, loose buttons, and coins can sometimes get stuck in the washer drum while it runs. Stuck foreign objects can damage the drum or cause loud noises during agitation in the washer.

Damaged Drum

If you sense that the washing machine drum doesn’t spin, then here’s a quick way to confirm it. Unplug your washer and rotate the drum by hand. If it doesn’t spin or has cracks or dents, then clearly you need to replace the drum.

Worn-Out Drum Bearings

Does your washer shake vigorously while operating, along with a noise? Chances are that the drum bearings may have been damaged. Now, replacing the bearings requires the drum to be removed.

Dirty Laundry

The washing machine drum spins in a set way to clean your clothes. However,. A failing drum can never clean your clothes and linens. If you notice stains on your clothing even after washing, then the drum is the culprit.

Cleaning

Often, soap scum and mould can accumulate inside your washer’s tub. So, your washing machine and washed clothes smell horrible. For a thorough cleaning, you should remove the drum. However, a washing machine drum replacement isn’t mandatory in this case.

How to Replace a Washing Machine Drum?

Atdoorstep offers quick and reliable services to replace washing machine inner drums and more. You can proceed on your own if you know about washing machine drum parts and have some technical know-how. Well, the washing machine drum repair costs vary based on the extent of the damage.

Here’s what you need to go through:

Safety First

A washing machine deals with both electrical and plumbing operations. Hence, you must observe some safety precautions before accessing the drum part.

• Unplug your washer from its power supply to keep electrical shock and hazards away.

• Next, turn off the water supply to the machine.

• Also, arrange some basic tools, such as screwdrivers, pliers, spanners, etc.

Disassemble the Washer to Access Its Drum

The drum or tub is a part of the washing machine’s interior. So, you need to disassemble the machine’s exterior to reach the drum. Depending on your washer’s build and model, the exact steps may vary. For the best help with Washing machine repair in Dubai.

Otherwise, stick to the general steps below:

• Start by removing the washer’s top panel. Unscrew the connections that secure the top panel.

• Next, check whether your washing machine’s front or rear panel needs to be removed.

• Some models need the removal of the front or rear panel to access the drum area.

• For front-load machines, you might have to dislodge the door seal, too. Only then can you expose the drum area and bring it out.

Make sure you take care of every screw and the door seal, and store them for future use or reassembly.

Disconnect Drum Components

After removing all the panels, you should detach the drum for safety. Many washing machine drum parts are connected together. So, the drum won’t come out if you just pull it out.

• Use pliers to loosen the clamps of the hoses connecting to the washing machine drum.

• Detect the drain and inlet hoses, and slide them carefully to free the drum.

• Additionally, loosen the tension of the drive belt.

• You may have to remove the fasteners that hold the drive belt in place. The drive belt connects the drum to the motor so that the tub can spin.

• If you see electronic controls, such as wires or plugs from the drum, motor, and other parts,

No matter how many connections you remove, you must remember them. If not, you won’t be able to put the washer back together after replacing the washing machine drum. Take a picture of each connection. This way, you can get help when reconnecting everything after replacing the drum.

Remove and Replace Washing Machine Drums

So, you have freed the washing machine drum for removal or replacement. So, you might have all the required washing machine drum parts for the replacement.

Now, you can follow the steps below:

• Release the drum suspension using a socket wrench.

• Then, lift the drum out of the washing machine housing carefully.

• Ensure that no other parts, like sensors or locks, are attached to the drum.

• Now, place the new drum and connect everything back.

Replacing the washing machine drum can be tricky. It’s hard to reconnect everything.

Test Your Washing Machine After a Drum Replacement

A DIY attempt to replace washing machine drums works only if the appliance runs smoothly. So, take your time and reassemble your washer carefully. Finally, connect the water supply hoses to your washer.

Plug your washer into a working power outlet and run a wash cycle. If the drum mechanism works fine, the replacement mission was a success.

How to Avoid Drum Damage in Future?

Drum damage signs are inevitable if you don’t take care of your washing machine. Experts share the following tips for a better longevity of your washer and its drum:

• Invest in a washing machine cleaner and use it regularly to avoid soap scum and mould formation. Or, a hot wash cycle with a vinegar solution may work.

• Don’t overload your washer. It can strain the drum, bearing, and other parts.

• Check your pockets and empty them before loading clothes into the washing machine.

Seek Professional Help to Replace Washing Machine Drums…

Atdoorstep provides expert washing machine drum replacement without complications and causing further damage. If you are not confident about the DIY replacement process, it’s your call to hire our technicians. Trained technicians will come to your home to fix your appliance effectively.

What’s the washing machine drum repair cost? It varies, but our technicians will give you a clear quote with competitive prices.