How to Fix Restore Errors in iTunes?

How to Fix Restore Errors in iTunes?

Call us @ 045864031 for fixing the all Restore Errors in UAE including all locations

With state of the art devices, Apple has always been a leader in the industry of Smartphones and iPods. But, with time issues can arise in these gadgets. When we encounter such problems then often we try restoring the device. But sometimes it is possible that the system or phone may not allow you to perform this task. Many users have encountered this situation where a message appears stating that “This device cannot be restored Error XXX.”

In this article, we will discuss the methods for resolving common iTunes restore errors. It is mandatory that you apply the described procedure in the same way. If the application is not correct, then it might not give you any benefit.

Fix Restore Errors in iTunes

  • Problem 1: Communication and networking issues

If your system is not able to download latest iOS firmware and is facing issues in establishing a connection with Apple servers which verifies a restore then you may receive following error codes:

3194,3000,3002,3004,17,1638,3014,3194,3200,3013,3014,3015

These errors are related to networking issues. Following are some of the solutions which you can try to fix them.

  • Solution 1: Check the internet connection

Sometimes, a faulty internet connection can result in the interrupted restore process. To make sure that this is not the problem, check your wireless router whether it is working correctly or not. Unplugged cables and ill settings of internet or wireless can also put you in the same situation. Ensure that all the wires are properly plugged in, and ideal settings are in place.

  • Solution 2: Apple servers downtime

It is possible that Apple’s servers may be down due to maintenance or some issues which can also hamper a process of restoring the device with iTunes. To check the status, you can visit Apple’s system webpage. It will ensure that the servers are up or not.

  • Solution 3: Use the right firmware

Downloading a right firmware for device plays a vital role. If you end up with a wrong software, then iTunes will not be able to finish the process of restoring. For example, if you try to install GSM firmware on an iPhone which works on CDMA then you will encounter this problem.

  • Solution 4: Unsigned firmware

To protect devices from jailbreaking, Apple has discontinued some firmware which was having security loopholes. If you are trying to restore such software, then iTunes will come up with an error. To check if the firmware has been signed or not, you can visit the official website.

  • Solution 5: Software interference

Sometimes a few software may keep USB ports from performing which will trigger iTunes to throw errors. To avoid this, check the settings such as a modified hosts file that may be interfering with iTunes while conducting a restore.

9,6,1611,2,4,9006

  • Problem 2: Issues related to security software

Software like anti-virus and firewall can also interrupt iTunes while completing a restore process or during communication with restore servers. When an application attempts to stop iTunes from performing this task than following are the errors which can arise:

Here you have to check the firewall settings. If iTunes is blocked for its incoming or outgoing connections, then unblock it. This change in settings will allow iTunes to access the USB ports so that the machine can communicate with your iOS device. In case of an anti-virus, every software has a different process of resolving this issue. To avoid any problem, you can try turning off the software for a while. It will remove all the barriers which were coming due to antivirus.

  • Problem 3: USB ports issues

A bad USB port or connection can also be responsible for these errors. In the beginning, iTunes will work normally. But when you proceed further with the restore process, it will generate an error. Following are the steps which can confirm if the problem is related to USB or not:

  • Step 1: Use an Apple USB cable

Sometimes we use third-party cables for charging and syncing our device. When you start the restore process through iTunes, then it is possible that it may not accept the wire unless it is the original one which is Apple certified. Lightning cables are one of such examples which can only perform if its original.

  • Step 2: Try other USB ports

Some USB ports may have a lower power or speed capacity. It can happen due to regular use as the metal contacts can become worn and may stop working. You can try other ports which are in good condition.

  • Step 3: Use a different computer

Changing the system can also help you in resolving this issue. It might happen that the computer or laptop which you are using is not compatible with iTunes.

  • Step 4: Check the sync cable

Apple USB cables are fragile and may break quickly with a strong pull. If the wire is damaged, then it can be the reason for errors. To make sure that this is not the problem, Check the wire carefully. A loose solder or frayed cable will jeopardize the whole process immediately.

  • Step 5: Don’t use keyboard ports and USB hubs

If you can connect a device to the system directly, then you can avoid accessory ports as well as USB hubs easily. Due to less power and week communication between the device and a laptop you may experience an interruption in restoring process.

  • Problem 4: Hardware issues

There are specific error codes which your system will generate if the problem is related to hardware. Following is the list of codes which can come up on your laptop.

1004,1012,1,3,11,1667,12,29,1014,34,35,36,37,40,1011,21,1669,23,26,27,28,13,14,16,20,53,56,1002

With below-mentioned steps, you can resolve these issues.

  • Step 1: Check the compatibility of iTunes with your laptop

If iTunes is not compatible with your system, then it will create problems. Make sure that the device is iTunes friendly. Any hacked software will also not be of any use as the Apple servers will detect it.

  • Step 2: Third-party hardware

Error 53 is one of the examples which occurs mainly due to third-party components. Replacements for parts like Touch ID sensor and lightning ports can cause this problem. To avoid such issues, make sure that you purchase components from an authorized dealer.

  • Step 3: Check the router

A router can be of two types which are wireless or wired. If it is facing issues, then it can choke up iTunes. In return, it will halt the process of restoring. To avoid such problem, you have to unblock iTunes if it is blocked by the firewall. If this does not help, then you can try resetting your router.

  • Problem 5: Beta or outdated software issues

An obsolete iOS version can also cause this problem. If your system is running on an outdated version of iTunes, then it is possible that it won’t be able to conduct a process of restoring. In case of the beta version, iTunes will not be able to restore the device to a public release of iOS. Following are the errors which you will experience if the version of iOS is responsible for process failure:

“The required resource can’t be found.”

“1015”

  • Solution 1: Update the iTunes

Check if the version of iTunes which you are using is updated or not. Download the latest update if the version is outdated. Only the new module will help you in conducting a smooth process of restore. Make sure that you install the update correctly.

Solution 2: Check if you are using beta or not

Due to lack of knowledge, users are usually not aware of the operating system they are using in their computer. If the laptop is working on beta versions of iOS, then it will require a perfect match of iTunes module. Download the software by keeping in mind the compatibility of a device.

  • Solution 3: Is your device “jailbreaked”?

If you have applied jailbreak on your device, then it becomes difficult to restore it through iTunes. In many cases, it is erased when you try to restore your gadget. This process of jailbreaking had allowed users to modify their host’s files when downgrading was possible, but now Apple has unsigned the firmware which had loopholes in it. Unauthorized modifications to a device will give rise to iTunes errors which can only be avoided if the equipment is maintained without any changes which are not authorized.

  • Solution 4: Recovery mode

Before commencing the process of restoring through iTunes, you can try recovery mode. Put your iOS device into this, or you can use DFU mode. It will help you in increasing the chances of having a successful process.

TheConclusion

It is necessary that you apply these methods in the same way it has been prescribed. If the problem persists then, we recommend that you should contact the Apple support UAE for resolving these issues. It is possible that some other reason is behind these errors. Only an expert with relevant knowledge can help you in finding the true cause behind it.