Today, computers have turned out to be an essential part of our daily lives. Through it we get smooth solutions for numerous everyday life desires. Be it online or web-based classes, remote work, virtual office meetings, shopping, and much more.
However, besides its support, sometimes users raise queries like my computer is not turning on,” and they can’t do anything. It is an annoying issue when the computer does not turn on, and especially when someone has essential work to do.
So, if you are also encountering issues with your computer, like the PC won’t turn on! You tried lots of times and pressed the start button, but the display did not turn on! Then don’t frustrate.
This blog provides a complete guide on how to fix the issue of a Computer Not Turning On with easy steps. Major causes behind the problem and its solutions?
What Are the Causes of the Issue of the Computer Not Turning On?
Let’s see the common reasons for the problem so you can understand how you can solve it.
Power Supply Problem:
When electricity is not reaching your computer properly, then it won’t power up at all.
Thermal or Overheating Problem:
If your computer shuts down unexpectedly, an overheating issue may be at fault, or an issue is happening.
Motherboard or Inside Hardware Failure:
A motherboard problem or internal hardware failure can cause the computer not to start.
Computer Display Fail:
Often, the computer turns on, but the display shows failure or is blank due to monitor, cable and connection issues.
Loose or Damaged Internal Connections:
When internal components like the hard drive, power connectors or graphics card connection loosen, then the system cannot start.
Corrupted BIOS or Firmware:
Often, the issue occurs because BIOS or startup software controls the boot process. When the BIOS gets corrupted, it prevents the power button from lighting up.
Apart, there are numerous reasons are possible to happens the issue computer not powering on. These such as:
- Damage internal components like the power switch pins on the motherboard
- Conflicting external devices, like a printer or an external hard drive
- Power sources like a wall socket, a computer and an extension board
- Faulty power supply unit, like a dead or failing PSU
- Software or firmware glitches, like a corrupted operating system
- CPU compatibility and so on
Easy and Quick Steps to Fix the Computer Not Turning On Problem:
Here is an easy and quick troubleshooting guide to fix the issue Computer Not Turning On. So, you can try these steps instantaneously to get rid of the issue.
Verify the Power Sources:
First you have to make sure that there is no power source issue. Sometimes a loose or faulty power strip or surge protector could cause the issue to happen.
- Ensure the PC power cable is tightly connected to both the wall socket and the PC.
- After that, validate that the power strip is enabled and working.
- You must try plugging into a different outlet.
- Ensure the power switch on the backside of your computer’s power supply unit (PSU) is ON.
Verify Physical Connections:
You must check that all the physical connections are safe. Sometimes loose or broken or damaged cables can cause PC power on issue Computer Not Turning On.
- Turn off your monitor and PC, and check that they both use the same cable as the computer PSU.
- Validate that the relation between your monitor and computer is correct.
- Ensure that the monitor and PC cables are plugged into an operational power outlet.
Test Your Monitor with Another PC:
When the issue arises, Computer Not Turning On, then you ought to try to test your monitor on a different computer via a compatible cable.
Connect the monitor to another PC through a compatible cable such as HDMI, Display Port, USB-C, Thunderbolt, etc.
- Validate that the cable you are using is firmly connected at both ends.
- Adjust the power cable through the monitor cable, and then scrutinize whether the PC turns on.
- In reality, often a defective power cable is the reason for the power issue.
In case the power issue is still not resolved and the computer display screen doesn’t appear! Then you must try to adjust the monitor settings according to needs.
Adjusting Your Monitor Settings:
Sometimes, the PC turns on, but no display appears due to incorrect monitor settings. So, let’s verify and correct the monitor settings.
- Make sure you have chosen the correct input source, such as HDMI, Display Port, or another.
- Use the monitor’s built-in buttons to adjust the contrast and brightness settings.
- Try moving the mouse on the keyboard to wake it up from sleep mode.
Inspect for Symbols of Power Button:
You must verify for symbols of the power button and check that the power and switches are functioning.
- Verify that the PC fans are running, the LED lights display, and the switches are on the back of the PC.
- Check that the power button LED light is turning on. It means the motherboard is getting power from the PSU.
- If the power button LED light does not work, that means there might be an issue with the power supply unit, motherboard, CPU, graphics card, or memory.
- Watch for any error messages, like “no bootable device found,” or a blank screen with a blinking cursor.
If nothing happens, like no lights, no fans or no error message, then it’s most likely a power issue. You should immediately take an experienced technician’s help to diagnose your PC and solve the issue.
Perform a Hard Power Reset:
Also, you ought to try to do a power reset to methodically solve the power issue.
- Unplug the power cable from the PC.
- Detach devices linked with the PC, such as printers, external drives, the mouse, etc.
- Power button holds for some seconds.
- Then, reconnect all power cables and push the start button of the PC.
If the above steps didn’t resolve the power issue, then get expert help through the best shop Computer Repair Services in Dubai.
Check Internal Hardware Failure:
If it is possible for you to comfortably open the case, then you should verify internal hardware components. These such as:
- Try to remove and reinsert the RAM sticks.
- Confirm the graphics card and storage drives are correctly connected.
- Detach unnecessary devices such as USB drives, keyboards, printers, etc.
- Then click on the start button on the PC.
By following these steps, your computer not turning on issue may be solved. In case you face trouble with internal hardware components, then you can get professional help.
Resetting the Real-Time Clock:
You ought to follow the process of resetting the real-time clock (RTC). It allows resetting the BIOS to factory default settings and resets the date and time. The process reset would help to restart your PC and solve the time setting configuration issue.
- Unplug all externally connected devices from the computer.
- Push and hold the power button for a few seconds on the computer.
- Leave the power button to stop the real-time clock.
- Again, plug in the power cables and then try to start the PC.
In case you find yourself in a tough situation where you need professional help, then don’t hesitate. Just connect with Computer Repair Services in the Dubai shop near your location. The proficient technician can provide quick assistance at your doorstep with reasonable service.
Summary:
The Computer Not Turning On problem occurs due to various reasons. From issues with power supply, hardware failures, RAM errors, overheating, and corrupted BIOS, to physical damage.So, if not resolved, the issue may result in a risky or costly repair solution. Thus, you can take a speed solution from an expert.
Contact with any professional and authorized Computer Repair Services in Dubai companies’ locations, like Deira, Jumeirah, Karamaand Dubai Marina. The certified and skilled technicians can analyze your computer and fix the power issue accordingly.
Therefore, the proficient technicians are available 24/7 to assist. Thus, you can also get a data recovery service and take a backup of your important data from your PC.
